DRAG MART
Text Box: DRAG MART

 

 

 

 

 

 

 

 
FOR SALE: *Two Pro Built Power Glide Trans for door car with Trans Brake, all good stuff, hardened input shaft, This is the same trans we use and win with you wont beat the price.
*Chrome Valve Covers for a Big Block Chevy
*Chrome Headers Down Swept with Mufflers for a Big Block Chevy
*I set Brand New, still in box Dyno Tech Down Swept Chromed Headers for Big Block Chevy
*two ATI Converters to fit Power Glides
*numerous Big Block Chevy engine combinations, and numerous Big Block Chevy parts (Aluminum Heads)
*numerous other Chevy racing stuff for sale
CONTACT: Arnie Malcolm, Derek Malcolm @ADM Motorsports   613-224-1162  or arnie.malcolm@sympatico.ca  or d_malcolm_33@hotmail.com
FOR SALE: 2003 SSR IN IMMACULATE SHAPE, VERY LOW MILEAGE MAKE A NICE TOY FOR SOMEONE WITH MORE TIME TO DRIVE IT THAN WE DO.
CONTACT: Arnie Malcolm, Derek Malcolm @ADM Motorsports   613-224-1162  or arnie.malcolm@sympatico.ca  or d_malcolm_33@hotmail.com

Yamaha Drag Bike FOR SALE
1380cc, 150hp, self starting, reliable, consistant low 9's with a 170lb rider,
Best run on gas was 9.06 at 145mph.
Built using: Kosman, NRC, Custom FRP, Pingel, Wiseco, Murray, Amal, MPS, MTC, MSD, Autometer, Mickey Thompson, Goodyear, Brembo.
$7000 and come racing.
613-291-9443
www.derrick.ottawadragbikes.ca
 

FOR SALE: Super Pro or Nostalgia 1923 “T”altered 101” w.b. 300 6cyl C4 with Art Carr brake          Arias pistons Mallory distributor Crane ign.,3 step Deadenbear delay box 6.60 1/8, 10.60 ¼ Competitive & consistent $7500.00  BOB GAULEY

(613)969-4479

250” RED Top Dragster For Sale
250” Wheelbase RED Chandler chassis Rear and front wings. Weld Wheels front and back New 16 rear tires w/beadlock rims. Mark Williams rear end 40 spline gun drilled axle set up. Stroud belts 2 chutes, Dedenbear command center delay box TCI air shifter with Biondo CO2 auto shut off valve. Dolly for towing NHRA chassis cert till 2008.Racepak V-300 data logger w/ gauges 565” BBC Merlin pro block10.3 tall deck Ported Dart 360 heads new manley valves and springs. Brodix manifold w/ Waterman alcohol injection w/pump. Callies crank, Oliver rods, Ross pistons, Comp cams roller cam, Jesel pro series rockers and belt drive. Mallory ignition w hyfire box Spark Retard, Dynatech headers,Moroso vacuum pump,B&M powerglide w/ dedenbear case Coan 8” converter. 19 inch cage fits 6ft 210lb Driver Car ran consistently 7.80’s 170 MPH. $26 K Turn key $10 K rolling or best offer 26’ Pace trailer available. Contact Garry Curran e mail garrycurran@gmail.com phone (905) 640-5767

1973 DART SWINGER

446 CI, ROLLER CAM AND LIFTER, MILDLY PORTED 906 HEADS, M1 INTAKE, ROSS 12:1 PISTONS, MANLEY RODS, FIREBALL MANUAL SHIFT TRANSMISSION, 3000 STALL TORQUE, STRANGE AXLES AND SPOOL WITH 4.56 GEARS, MIKEY THOMPSON 30X9 SLICKS, CENTER LINE WHEELS, 6 POINT CAGE WITH SWINGOUT BAR, MSD IGNITION (6AL), 5 GALLON CELL, 1/2" FUEL LINE, 2 HOLLEY 

1980 Z28 Camaro 454 30 over 600 hp best et was 6.81 at 100 mph with a 1.43 60s
comp eng slide-a-link, Richmond pro gear, superior axles, b&m 3600 sthal converter and deep aluminum pan, moroso pump and pan,  aluminum rad, electric fan and water pump, super comp headers,  weld wheels, cross drilled rotors, all new brakes in 2007, B&M pro ratchet shifter, aeromotive fuel pump, rci fuel cell, braided #8 line, 8 point comp eng cage, drag shocks, all steel except glass 6 inch outlaw hood.

$8500 ROLLING WITH TRANS
1-705-497-8154
Joe Villeneuve

 1974 Camaro back half 461 bbc dart heads 700 hp plus glide with brake delay box super pro or pro street excellent condition many time show winner, $24,000.
613-223-5579

                           JR. DRAGSTER FOR SALE

Fresh Polar alcohol motor, alcohol 28mm carb, Polar clutch and dual caliper hydraulic brakes. This car is expected to run 9 seconds in 1/8 mile. Starter, helmet and fire resistant jacket included. $5000.00. This car is race ready....add alcohol and go! Call Terry 613-297-6542.
 

 
TRANNY FOR SALE, CALL GERRY AT PARTNERS AUTO PERFORMANCE: 613-225-4893
1.76 RATIO POWERGLIDE,FULLY ROLLERISED THRUST BEARINGS,JW ULTRA BELL FOR CHEVROLET BOLT PATTERN,JW ULTRA TAILSTOCK,JW 9310 HELICAL HD GEAR SET,JW VASCO INPUT SHAFT TURBO SPLINES,JW HD CLUTCH HUB,ATI TRANSBRAKE VALVE BODY,TCI SCATTERSHIELD INSTALLED AND LOCKING TCI ANODIZED DIPSTICK--FRESH REBUILD LAST YEAR--TCS STEEL STATOR 9 INCH CONVERTOR-4300-4600 STALL SPEED--TCS STEEL STATOR 8 INCH CONVERTOR 5200 STALL SPEED--CALL FOR PRICING

SEMI PRO FIREBIRD
1968 Firebird, 454, Turbo 400 with manual Valve body, Engine and Transmission have about 200 passes since rebuild, 4500 stall torque, 33X15 slicks with lots of life remaining, Cage and Tubs done by Crilly Chassis, Dana 60 rear end with spool, ladder bars, coil over, MSD, Holley, Griffin. Car has original windows and I have ownership, could be put back on road as pro street. 12.0 seconds in 1/4 mile. Good dependable car and ready to race.
$11000.00, 613-527-2818
                                           ATTENTION DODGE BOYS ENGINE FOR SALE
ENGINE SOLD CAR NOW FOR SALE ALSO

1980 Dodge Mirada Super/Pro, Top/ET, Hot/Rod, rolling chassis with transmission and drive shaft for sale. All steel body with original glass, Bear's rear clip, 10 point roll bar, jazz seat, Alden aluminum coil-overs with HD chrome moly 4 link, Dana 60/4:56/spool/moser axels, only 2 years old. Front clip with struts and Bear's motor plate, 8 gal. fuel cell,Holley 140GPH pump, Fram cannister filter, #8 braided line to front of car, Barry Grant billet regulator. Cheetah SCS with Biondo air shift, Dedenbear delay box, Auto Meter Ultra-lite gauges, 727 tranny with Hemi drum, Turbo Action brake, Dynamic 5200 convertor, HD cooler and large radiator. Car comes with cowl induction fiberglass hood and steel hood with Hemi scoop. This car runs 10:40's in the 1/4 and 6:60's in the 1/8 mil
e with a stout 400 engine @ 3400 lbs. The price is $12,000.00 CDN for everything except the motor. Contact me @ 613 299-1469 or e-mail me @ garywager@hotmail.com for more pictures.